The thermal insulating cold storage panels consist of two profiled sheets bonded in an insulating rigid CFC & HCFC free foam core of polyurethane (PUR) or polyisocyanurate (PIR). Panels are made of 42 kg/m³ (± 2) foam density, are CE marked and satisfy European specifications that refer to hygiene and protection of food in production, storage and preservation facilities. Wall and ceiling panels are produced in different thicknesses (80 mm, 100 mm, 120 mm, 150 mm, 180 mm). The cold room panels are 100 cm wide and can be supplied according to your specific requirements in relation to length, steel sheet thickness, profile, coatings and colour.
Standard ribbed interior and exterior surface of cold room panels have hot dipped galvanized steel sheets. The standard total top coating of both surfaces is 25μm polyester colored in RAL 9002 authentic polyester paint. Suitable for food contact PVC food safe non toxic top coatings are also available upon request. Panels are smooth, hygienic and easily cleanable. As cold room panels are hygienic, they are also commonly used in hospitals, supermarkets, warehouses, clean rooms and laboratories. A wide selection of flashings and sanitary fittings are also available to complete the installation of your temperature controlled environment.
Standard ribbed interior and exterior surface of cold room panels have hot dipped galvanized steel sheets. The standard total top coating of both surfaces is 25μm polyester colored in RAL 9002 authentic polyester paint. Suitable for food contact PVC food safe non toxic top coatings are also available upon request. Panels are smooth, hygienic and easily cleanable. As cold room panels are hygienic, they are also commonly used in hospitals, supermarkets, warehouses, clean rooms and laboratories. A wide selection of flashings and sanitary fittings are also available to complete the installation of your temperature controlled environment.
PUR / PIR FoamPolyurethane (PUR) and polyisocyanurate (PIR) foam is odorless, remains chemically neutral and prevents mold and fungus formations. The mechanical capacities remain unchanged when exposed to humidity and moisture.
|
|
|
CFC & HCFC FREEBlowing agents used during the cold storage panels production are safe and friendly to the atmosphere and environment in general as chlorofluorocarbons and hydrochlorofluorocarbon free (CFC & HCFC Free) agents are used during the foam expansion process.
|
Excellent thermal insulation for buildings and cold storage rooms.
Polyurethane (PUR) and polyisocyanurate (PIR) foam core provides excellent thermal conductivity coefficient, unparalleled by any mineral wool or EPS sandwich panel.
POLYESTER COATINGThe standard thermo-insulation panel is produced with polyester coating with a total coating thickness of 25μm. The cold room panel is suitable for normal non-polluting environmental conditions and includes anti-corrosion protection.
|
|
|
PVC FOOD SAFE COATINGThe PVC food safe cold storage panel is suitable for areas which require controlled atmosphere such as food processing facilities, food storage warehouses, microbiological and pharmaceutical laboratories. This anti-bacterial special type of chemical free surface coating is also non toxic and has a total coating thickness of 110μm - 120μm. The PVC food safe panel is not suitable for outdoor application and UV radiation exposure.
|
PVDF COATINGThe Polyvinylidene-Fluoride panel also knows as PVDF thermo-insulated cold room panel is suitable for outdoor applications. Manufactured with increased UV and anti-corrosion protection this type of insulating refrigeration panel coating is produced with a total coating thickness 25μm - 50μm.
|
|
|
SPECIAL COATINGSCustom coatings are also available for our cold room insulated panels upon request and offer the possibility of increased anti-corrosion protection, increased UV protection and different coating thicknesses.
|
Cold Room Panel Thermal Conductivity
|
Panel Thickness
80 mm
100 mm
120 mm
|
Thermal Transmittance K (W/m 2K)
0.26
0.21
0.18
|
Thermal conductivity coefficient "λ" = 0,020 W/m*K - Steel sheet thickness 0.40 / 0.45mm - Foam Density 42 kg/m³ (± 2)
Cold Storage Panel Characteristics
Steel ThicknessSteel sheet thickness of both faces is 0.40mm - 0.45mm.
Foam Density40 ± 2 Kgr/m3
|
CoatingTop coating on both faces is authentic polyester paint 25μm.
Fire ClassFoam PIR = B-s2,dO
(EN13501-1) |
ColorRAL 9002
Fire ResistanceFoam PIR EI-30
(EN13501-1-2) |
SteelSteel S220GD - S320GD
(EN 10346). ProtectionHot dip galvanized metal sheet protection.
|